1.Products in Package
1 PC of 100 M （±5）EL Wire Wheel（PT 12cm）,1 PC of AC220V/110V
Charger,1 PC of 5 M Conneting Lead Wire,1 PC of Car Electrical
2. Application Method
Taking out the EL wire wheel.Turn on the switch to judge if there
is power or not. The function is On/Off/Twinkle.
Under the condition of lighting, EL wire can be pulled or reeled
To fix EL wire,Plastic binding strip can be used and removed
Rotate the handle to reel the EL wire in neatly for easy pulling
3. Three Mode of Charging:
To turn off the switch before charging.1）To connect AC220V/110V
Charger，Suggest to charge for 9 hrs for fully loading.2）Car DC12V
charge: Lauch car but do not step on accelerator peda, connect lead
wire with Car Electrical Source Plug, then connect to Car power .
To continune charge for 1 hr and reach 50% electricty load. And cut
off the connecting wire while not charging to avoid discharging.
4. Technical Data:
Lighting Color: Blue-green; Weight: 25KG；Power: 50W；Fully loaded
eletricity: 5 hrs for continuous lighting，7 hrs for Twinkling
lighting；Obsevation Distance:100M；Maximum Resist Pull: 500
kgs；Lithium batteries: Charging /discharging is over 300 times；EL
Wire Life-span: 1000 hrs；Under the condition of battery fully
loaded, to keep dry for 30 days and，remaing electricity is
30%；Application Condition:DC12V；Frequency: 1500Hz；Application Limit
Temperature: -20℃~ ＋60℃；
EL wire wheel can not be used in rain or water environment.Pls. do
not launch engine when connecting with 12V Car power for direct
EL wire will not work or have Short circuit if bending angle is
less than 45 degree or pulling strength is beyond required resist
of pull. Pls. do not remove end parts or Inner equipment to avoid
the invalidation of anti water ability and change of resist pull.
Switching circuit withs lighting power delay protect.